Description
The Unico PowerSpin FX Centrifuge spins at a fixed speed of 3,400 rpm and is recommended for blood procedures. The PowerSpin FX Series centrifuges are compact, economical, and quiet for a better working environment.
Warranty: 1 Year - Limited.
All PowerSpin FX models have a timer and on/off switch, as well as other features that are normally only found on units costing much more.
Note: The C806/C808 models are not recommended for fecal specimens, urine, and microhematocrit procedures.
Features
Unico PowerSpin FX Centrifuge Features
- Six (6) or eight (8) place rotor for 2 to 15 ml tubes.
- Quiet running (58 decibels at 3400 rpm).
- Fixed angle rotor.
- Motor: AC.
- Rotor chamber is accessible for cleaning.
- 0 ~ 30 minute mechanical timer with bell signal at the end.
- Detachable power cord.
- Easy clean exterior.
- Lid opening for strobe check of speed.
- Latching lid with safety switch triggered to shut down the power when the lid is opened.
- Light indicator is lit when the power is on.
- Pre-drilled/tapped to accept optional Tube Holdsters.
- Optional Tube Holdster allows you to have up to 18 tubes or adapters at your fingertips, side-mounted to the centrifuge.
Specifications
Unico PowerSpin FX Centrifuge Specifications
- Weight: 13 lb (5.9 kg).
- Size: 10.2" x 11.8" x 7.9" (260 mm x 300 mm x 200 mm).
- Maximum RPM: 3400, Fixed.
- Maximum RCF(g): 1320.
- Maximum Test Tube Size: 16 x 110 mm.
- Input: Standard 115 V / 60 Hz.
- Shipping Weight: 15 lb (6.8 kg).
- Shipping Size: 13.4" x 14.8" x 10.6" (340 mm x 375 mm x 270 mm).
Configurations
Unico PowerSpin FX Centrifuge Configurations
- #C806: 6 Place Rotor with 6 x 10 ml or 3 x 15 ml Nominal Capacity.
- #C806H: 6 Place Rotor with 6 x 10 ml or 3 x 15 ml Nominal Capacity and 18 Place Tube Holdster Rack.
- #C808: 8 Place Rotor with 8 x 10 ml Nominal Capacity.
- #C808H: 8 Place Rotor with 8 x 10 ml Nominal Capacity and 18 Place Tube Holdster Rack.
Accessories
Unico PowerSpin FX Centrifuge Accessories
The following accessories are compatible and commonly purchased with the PowerSpin FX Centrifuge:
- #C800-00: 6 Place Rotor.
- #C800-01: 8 Place Rotor.
- Regular Tube Shield (2/Box):
- #C800-02: Standard.
- #C800-02M: Metal.
- 25 mm Short Tube Adapter:
- #C800-03-6: Pack of 6.
- #C800-03: Pack of 10.
- #C800-04: Small Tube Adapter (2/Box).
- #C800-05: 10 mm Greiner Tube Lift Adapter (12/Box).
- #C800-18: 18 Place Tube Holdster Rack.
- #C800-75: Tachometer.