Hill-Rom TotalCare SpO2RT 2 ICU Bed

Hill-Rom TotalCare SpO₂RT 2 ICU Bed Features

• Integrated powered air weight-based pressure redistribution surface. The surface uses input from the bed scale system to adjust the cushion pressures based on the patient's weight.
• Rotation mode provides gentle, side-to-side, continuous Continuous Lateral Rotation Therapy (CLRT) to aid in the prevention and treatment of pulmonary complications related to immobility.
• Percussion & Vibration (P&V) Therapy, including postural setting options, can be done separately or together as a sequential treatment. Treatments can be done with the patient in the supine or the right or left side lying positions to facilitate postural drainage or in conjunction with CLRT.
• The Graphical Caregiver Interface (GCI) is located on the intermediate siderail next to the caregiver control panel.
• Digital head of bed angle indicator and alarm mechanically indicate the angle of the head section from -15 to 80° with respect to the floor, and the head angle alarm lets the caregiver set an alarm to sound if the head section goes below 30° or 45°.
• When the three-level bed exit alarm system is activated and it detects an alarm condition, an alarm will sound a message will show on the GCI. You can silence, suspend, resume, or turn off the alarm.
• Using the FullChair Patient Position Mechanism, the caregiver can place the TotalCare Bed System in one of three basic chair positions: Chair, Chair Egress, and Recliner.
• The Boost Position Systems assists the caregiver in moving the patient up in bed.
• Turn Assist mode assists the caregiver in turning the patient for linen changes, dressing changes, bedpanning, back care, and other nursing procedures.
• FlexAfoot retractable foot control allows you to customize the length of the sleep surface for the patient.
• Emergency Trendelenburg is capable of achieving up to a 20° angle if the bed is in the full height position.
• When the CPR function is activated, the surface will go into Max-Inflate mode.
• You may view patient history data from the CGI, including rotation, percussion, vibration, head angle, weight, and more.
• RemindMe alarms can be turned on to alert the caregiver that Percussion and Vibration or rotation therapies have been stopped for a set period of time.
• Optional IntelliDrive Transport System allows the caregiver to propel the bed during patient transport with minimal applied force.

Hill-Rom TotalCare SpO₂RT 2 ICU Bed Specifications

• Length: 81.5 to 92.5" (207 to 235 cm).
• Width: Side rails up to 40.5" (102.9 cm).
• Surface Dimensions: 84" (L) x 35" (W) x 11" (H).
• Sleep Deck to Floor:
  • Low Position: 15" (5" casters).
  • High Position: 34".
• Maximum Head Elevation: 75°.
• Weight Capacity: 500 lb (227 kg).

Hill-Rom TotalCare SpO₂RT 2 ICU Bed Literature

Hillrom TotalCare SpO₂rt Therapy System Rental Sell Sheet