PURELL Surface Spray Active Ingredient Test Strips (6/Pack)

The PURELL Active Ingredient Test Strip pack is a complete testing kit designed for regulatory compliance assurance. Each pack includes: * Six active ingredient test strips * An instruction card with step-by-step guidance * A color matching chart for immediate and accurate interpretation of ‘PASS’ (29.4% ethyl alcohol) or ‘FAIL’ results.

Yes, these test strips are exclusively engineered for use with PURELL Surface Sanitizers and Disinfectants.

They are designed to guarantee test accuracy for these specific formulations and are essential for regulatory compliance. The strips verify that the active ingredient concentration meets or exceeds the required minimum level of 29.4% ethyl alcohol to achieve a ‘PASS’ result.

Yes, these PURELL Active Ingredient Test Strips are an essential tool for achieving and maintaining regulatory compliance in commercial or institutional settings.

They help satisfy federal, state, and local health regulations by providing critical assurance:

• Verifying Efficacy: They confirm that your PURELL Surface Sanitizers and Disinfectants maintain the required concentration level of the active ingredient (ethyl alcohol).
• Clear Pass/Fail: The included color matching chart allows you to quickly verify the concentration, indicating a ‘PASS’ result only if the solution contains the required 29.4% ethyl alcohol level or higher.

These PURELL test strips are specifically designed to verify that PURELL Surface Sanitizers and Disinfectants maintain the necessary concentration of active ingredients for efficacy and regulatory compliance. The target level confirmed by the strips is:

• 29.4% ethyl alcohol

The kit includes a color matching chart that provides clear pass/fail results. A concentration of 29.4% or 74% is indicated as a “PASS,” while 0% concentration registers as a “FAIL.”

Yes, these test strips are specifically designed to verify the ethyl alcohol concentration in PURELL Surface Sanitizers and Disinfectants. This process is crucial for ensuring regulatory compliance and confirming the product’s efficacy. The kit includes a color matching chart for immediate results.

Concentration Requirements

The test strips indicate whether the solution meets the required effective level for sanitization:

• Active Ingredient Tested: Ethyl Alcohol
• Required Concentration for ‘PASS’: 29.4%
• Failure Indications: Results matching 0% or 14% ethyl alcohol are marked as ‘FAIL’.

The testing procedure is a simple, visual, 5-step process designed to confirm that your PURELL Surface Sanitizer or Disinfectant maintains the required active ingredient level of 29.4% ethyl alcohol.

Each pack includes an instruction card and a color matching chart to ensure accurate results. The key steps and timing requirements are:

1. Dip the test strip into the solution for 5 seconds.
2. Wait 60 seconds for the chemical reaction to develop.
3. Read the result within 10 seconds by comparing the strip to the color matching chart.

The included chart facilitates a clear pass/fail determination:

• PASS: Confirms concentration levels of 29.4% or 74%.
• FAIL: Indicated for 0% concentration.

Yes, the PURELL Surface Spray Active Ingredient Test Strips are manufactured in the United States, ensuring high-quality production standards.

The included color matching chart is essential for verifying regulatory compliance by providing an immediate, visual interpretation of the test strip results. It ensures accuracy by:

• Establishing Pass/Fail Thresholds: The chart displays distinct color blocks corresponding to specific ethyl alcohol concentrations.
• Confirming Efficacy: Users compare the color developed on the strip against the chart to ensure the PURELL sanitizer meets the minimum required effective concentration of 29.4% ethyl alcohol (‘PASS’).
• Indicating Failure: It clearly identifies concentrations that result in a ‘FAIL’, such as 0% or 14% ethyl alcohol, ensuring the disinfectant’s potency is accurately determined.

These PURELL test strips are specifically designed to verify the concentration of ethyl alcohol in PURELL Surface Sanitizers and Disinfectants.

To ensure efficacy and compliance with health regulations, the test strip checks that the solution maintains the required minimum level of 29.4% ethyl alcohol for a ‘PASS’ result.

Yes, these test strips are designed for immediate and accurate interpretation, helping you quickly ensure regulatory compliance.

The kit includes specific components to facilitate precise reading:

• Color Matching Chart: This chart allows for instant visual comparison to determine the concentration level.
• Instruction Card: Provides clear, step-by-step guidance on conducting the test.

Test outcomes are clearly marked based on color comparison:

• A ‘PASS’ result confirms that your PURELL Surface Sanitizer or Disinfectant meets or exceeds the required effective concentration of 29.4% ethyl alcohol.
• Results corresponding to 0% and 14% ethyl alcohol concentration are indicated as ‘FAIL’.