Wallach Cryosurgical Tip - T-0524 Bevel

The Wallach T-0524 Bevel tip is compatible with the following Wallach Cryosurgical Systems:

• LL100
• LLCO2
• WA1000B

Yes, the Wallach Cryosurgical Tip - T-0524 Bevel is reusable after proper sterilization. It is steam sterilizable, offering a cost-effective solution for cryosurgical procedures. Always follow the manufacturer’s directions for sterilization.

The Wallach Cryosurgical Tip - T-0524 Bevel has the following dimensions:

• Tip Diameter: 5 mm
• Tip Protrusion: 24 mm

To ensure the longevity and safety of the Wallach Cryosurgical Tip, strict adherence to the following cleaning and sterilization procedure is required after each use:

1. Remove the Disposable Shield: The disposable plastic shield must be removed before cleaning or sterilization.
2. Pre-Sterilization Cleaning: Scrub the tip thoroughly to remove any blood and particulate matter, and then rinse it well with water.
3. Sterilization: The tip must be sterilized using steam sterilization. Always follow the manufacturer’s validated directions for appropriate sterilization.

Note that a new disposable shield must be attached prior to the next procedure.

The disposable plastic shield is an essential component that must be attached to the tip for every procedure. It serves two critical safety functions:

• Tip Insulation: The shield provides necessary insulation for the cryosurgical tip during the procedure.
• Attachment Assurance: It acts as a positive stop mechanism to assure correct and secure attachment to your Wallach cryosurgical unit (LL100, LLCO2, or WA1000B).

The Wallach Cryosurgical Tip is manufactured in the USA, ensuring high-quality production standards.

The plastic shield is strictly disposable and intended for single use to ensure safety and proper insulation.

After each procedure, you must:

• Remove and discard the used disposable shield.
• Clean and sterilize the reusable cryosurgical tip.
• Attach a new disposable plastic shield before the subsequent procedure to assure correct attachment and procedural safety.

The T-0524 Bevel tip is designed for reuse and requires detailed cleaning and sterilization after every procedure.

To prepare the tip for the next use, follow these steps:

1. Remove Shield: Immediately remove and discard the used disposable plastic shield.
2. Clean: Scrub the reusable metal tip thoroughly to remove all blood and particles.
3. Rinse: Rinse the tip with water.
4. Sterilize: The tip must be sterilized using steam sterilization. Always adhere strictly to the manufacturer’s directions for the validated sterilization process.
5. Preparation: Before the next procedure, attach a new disposable plastic shield for proper insulation and seating.

Yes, the Wallach Cryosurgical Tip is steam sterilizable and designed for multiple uses. The disposable shields ensure proper insulation and attachment, and are renewed with each procedure for optimal functionality and safety.

Yes, the T-0524 Bevel tip is designed for precise cryosurgical applications. It features a measured diameter of 5 mm and a protrusion length of 24 mm for targeted use.