GE Giraffe OmniBed Incubator

GE Giraffe OmniBed Incubator Features

• No need to transfer patients from an incubator to a patient warmer.
• 360° rotating patient mattress.
• Drop-down removable doors and rotating bed provide easy access to the in-bed scale.
• Provides a consistent and controlled thermal environment.
• Air Curtain helps to protect from heat loss.

GE Giraffe OmniBed Incubator Specifications

• Weight: 284 lb (129 kg).
• Shipping Weight: 400 lb (181 kg).
• Dimensions (with canopy closed, bed lowered): 57.9" (H) x 27.2" (W) x 44.1" (D) (147 cm x 69 cm x 112 cm).
• Height:
  • Canopy Closed, Bed Lowered: 57.9" (147 cm).
  • Canopy Closed, Bed Raised: 68.5" (174 cm).
  • Canopy Open, Bed Lowered: 81.9" (208 cm).
  • Canopy Open, Bed Raised: 92.9" (236 cm).
• Footprint: 45" x 26" (114 cm x 66 cm).
• Floor to Mattress Height: 33 to 43" (84 to 109 cm).
• Mattress Size: 25.5" x 19.2" (64.8 cm x 109 cm).
• Access Door Size: 9" x 31" (23 cm x 78 cm).
• Drawer Size: 19" x 20" (48 cm x 50 cm).
• Drawer Depth: 8" (20 cm).
• Display: Full Color LCD Touchscreen; 10.4" (26.4 cm).
• Mattress Tilt Angle: 12°.
• Micro Filter: 0.5 mu -99.8% efficiency 3M filter.
• Data Collection: RS-232.
• Tubing Access Ports: 8.
• Power Requirements:
  • 10.5 A @ 100 v ~, 50/60 Hz.
  • 9 A @ 115 v ~, 50/60 Hz.
  • 4.5 A @ 220 v ~, 50/60 Hz.
  • 4.5 A @ 230 v ~, 50/60 Hz.
  • 4.5 A @ 240 v ~, 50/60 Hz.
• Battery: 8.4 V NiMH.
• User Control Settings:
  • Baby (Servo) Temperature Control: 35 to 37 °C in 0.1° increments (95 to 98.6 °F in 0.18° increments). Regulated baby temperature in both open and closed bed modes.
  • Manual Radiant Power Control: 0 to 100% in 5% increments.
  • Air Temperature Control: 20 to 39 °C in 0.1° increments (68 to 102.2 °F in 0.18° increments).
  • Servo Humidity Control Range: 30 to 95% relative humidity in 5% increments.
• Performance:
  • Accuracy: ± 0.35 oz (10 g).
  • Range: 0.66 to 17.6 lb (300 g to 8 kg).
• Servo Oxygen Control Performance:
  • Control Range: 21 to 65%.
  • Display Range: 16 to 70%.
  • Rise Time: Less than 10 minutes from 5% below set point in Whisper Quiet Mode.
  • Recovery from Opening Porthole: Less than or equal to 5 minutes from closing porthole to 5% below the set point.
  • Alarms: ± 3% from the set point.
  • Accuracy: 5%.
• Humidifier Performance:
  • Recovery Time: Less than 15 minutes (typical) Recovery to 75% RH with 39 °C (102.2 °F) air set temperature.
  • Operating Time Between Refills: Greater than 12 hours @ 65% RH control setting in a 25 °C (77 °F) / 50% RH ambient.
  • Reservoir Capacity: 1,000 ml.
  • Servo Control Accuracy: ± 10% for settings up to 85%: minimum 75% for settings greater than 85%.
  • Ramp-Up Time: ± 50 minutes. Time to reach 75% RH with a 39 °C (102.2 °F) control temperature from a cold start in 25 °C (77 °F), 50% RH room.
• Operating Conditions:
  • Temperature: 20 to 30 °C (68 to 86 °F).
  • Humidity: 5 to 85% RH (non-condensing).
  • Air Velocity: Up to 0.3 m/sec.
  • Water Ingress: IPXO.
• Storage Conditions:
  • Temperature: -25 to 60 °C (-13 to 140 °F).
  • Humidity: Less than or equal to 85% RH (non-condensing).
  • Pressure: 50 to 106k Pa.

GE Giraffe OmniBed Incubator Literature

GE Giraffe OmniBed Operator's Manual

GE Giraffe OmniBed Service Manual